Riello UPS

Sentinel Power Green

Sentinel Power Green-image

Sentinel Power Green is the ideal solution for protecting IT systems, telecommunications equipment and mission critical systems such as safety devices, ensuring maximum power reliability. Sentinel Power Green is designed and built using state-of-the-art technology and components to provide maximum protection to the powered loads with no impact on downstream systems and optimized energy savings. The series includes 6 kVA single/singlephase and 8-20 kVA single/single-phase models with on-line double conversion technology (VFI): the load is powered continuously by the inverter which supplies a sinusoidal voltage, filtered and stabilized in terms of form and frequency. Input and output filters provide significant further immunity from mains disturbances and lightning strikes. In terms of technology and performance, Sentinel Power Green is one of the best UPS available on the market today: selectable Economy Mode and Smart Active Mode functions; custom diagnostics LCD display, RS232 and USB interfaces with Powershield software, ESD input, interface slot with optional boards.

Available in 1:1 singlephase/singlephase 6 kVA and 1:1/1:3 8-20 kVA.

For SOHO, Datacentre, E-Medical, Industry, Transport, Emergency.

Riello UPS All Rights Reserved.

Technical Specification

MODELS SPM 6 SPH 8 SPH 10 SPH 10 ER SPH 15 SPH 20 SPH 20 ER
POWER 6000 VA/5400W 8000/6400W 10000VA/9000W 15000VA/13500W 20000VA/18000W 20000VA/18000W
INPUT
Nominal voltage 220-230-240 Vac 1 ph 220-230-240 Vac 1 ph/380-400-415 Vac 3 ph +N
Voltage range without battery intervention 176 Vac@100% load/110 Vac @50% load
Maximum permitted voltage 276 Vac
Nominal frequency 50/60 Hz±10 Hz
BYPASS
Voltage tolerance 160-276 Vac (selectable in Economy Mode or Smart Active Mode
Frequency tolerance selected frequency ±10%
Overload Times 125% for 1 min, 150% for 10 seconds
OUTPUT
Nominal Voltage 220-230-240 Vac selectable
voltage distortion <2% with linear load/ <5% with non-linear load
Current distortion 3%
Frequency 50/60 Hz selectable or with automatic selection
Static variation ±1,5%
Dynamic variation ≤5% in 20 ms
Waveform Sinusoidal
Crest factor ≥3: 1
BATTERIES
Type VRLA AGM maintenance-free load based
Recharge Time 6-8 hours
Recharge current(only for ER versions) N.A. 8 A N.A 8 A
OTHER FEATURES
Net Weight (kg) 63 78 84 28 146 157 48
Gross Weight(kg) 77 92 98 42 164 175 66
Dimensions (wxDxH)(mm) 262 x 654 x 708 350 x 731 x 818
Packaging dimensions (WxDxH)(mm) 720 x 428 x 970 870 x 475 x 1075
Smart Active Efficiency up to 98%
Protections overcurrent-short-circuit-overvoltage-undervoltage-temperature-excessive low battery
Communications USB/ RS232 + slot forr communication interface
Parallel max.2 units in parallel with optional kit
Input plugs terminal block
Output sockets Terminal block + 2 IEC 320 C13
Standards EN 62040-1 EMC EN 62040-2 Directives 2006/95/EC- 2004 /108 EC EN 62040-3
Operating temperature 0°/+40°C
Relative humidity <95% non-condensing
Colour Dark grey RAL 7016
Noise level at 1 m (ECO Mode) <40 dBA
Moving the UPS castors
Scroll to top