Master Industrial
Industrial application protection
Master Industrial series UPS provide maximum protection and power quality for any type of load, especially industrial application, such as manufacturing and petrochemical processes, electrical distribution and power plants. Master Industrial is an on-line double conversion UPS (class VFI SS 111 in accordance with IEC EN 62040-3) with input and output isolation transformers.
Industrial Environment
Master Industrial is suited to the most demanding installation environments where there are vibrations, mechanical stresses, dust and in general where operating conditions are unfavourable to products created for the standard UPS market.
Available in 3:1 threephase/singlephase 30-80 kVA DC BUS 220 Vdc.
For Industry, Transport.
Riello UPS All Rights Reserved.
Technical Specification
| MODELS | MIM 30 | MIM 40 | MIM 60 | MIM 80 |
| INPUT | ||||
| Nominal voltage | 380-400-415 Vac three-phase | |||
| Voltage tolerance | 400 V± 20% | |||
| Frequency | 45-65 Hz | |||
| Power factor | >0.93 | |||
| Current distortion | <6% | |||
| Soft start | 0÷100% in 120″ configurable | |||
| Permitted frequency tolerance | ±2% (selectable from ±1% to 5% from front panel) | |||
| Standard equipment provided | Back Feed protection;separable bypass line; battery isolation | |||
| BATTERIES | ||||
| Type | VRLA AGM/ GEL; NiCd | |||
| Number of cells | 108/114 | |||
| Maximum charging voltage | 274 V | |||
| Temperature compensation | -0.5 V x °C | |||
| OUTPUT | ||||
| Nominal power (kVA) | 30 | 40 | 60 | 80 |
| Active power (kW) | 24 | 32 | 48 | 64 |
| Nominal voltage | 230 Vac single-phase | |||
| Static stability | ±1% | |||
| Dynamic stability | ±5% | |||
| Voltage distortion | <1% with linear load / <3% with non-linear load | |||
| Frequency | 50 or 60 Hz (selectable) | |||
| Crest factor | 3:1 lpeack/lrms | |||
| Overload | 110% for 60′;125% for 10′;150% for 1′ | |||
| Short-circuit current | 3 x l nom. | |||
| INFO FOR INSTALLATION | ||||
| Weight(kg) | 640 | 650 | 910 | 940 |
| Dimensions (WxDxH)(mm) | 800 x 800 x 1900 | 1200 x 800 x940 | ||
| Remote signals | dry contacts | |||
| Remote controls | ESD and bypass | |||
| Communications | Double RS232 + dry contacts + 2 slots for communication interface | |||
| Operating temperature | 0°C/ + 40°C | |||
| Relative humidity | <95% non-condensing | |||
| Colour | Light grey RAL 7035 | |||
| Noise level at 1 m (ECO Mode) | 68 ÷ 70 dBA | |||
| Ventilation | Redundant fans (front-top) | |||
| IP rating | IP20 | |||
| Efficiency | up to 94% | |||
| Standards | Directives LV 2006/95/EC – 2004/108/EC;Performance IEC EN 62040-3 | |||
| Safety IEC EN 62040-1;EMC IEC EN 62040-2 | ||||
| Classification in accordance with IEC 62040-3 | (Voltage Frequency Independent) VFI-SS-111 | |||
| Moving the UPS | transpellet | |||